Introduction Of Impact Crusher
Compared with the jaw crusher, impact crusher is used as the secondary crusher. It can crush all kinds of course, medium and fine materials whose feed particle size doesn’t exceed 500mm and compressive strength doesn’t exceed 350MPa. The impact crusher designed can shape particle better.
Applied materials Of Impact Crusher
Applied materials: Dolomite, calcite, limestone, concrete and other minerals. FTM impact crusher has high production efficiency and good safety performance.
Working Principle of Impact Crusher
Driven by the motor, the rotor rotates at a high speed. When the material enters the impact area of the blower, it hits against with the blower, and then is thrown to the counterattack device to be crushed again, and then the materials bounce back to the hammer action area to be crushed again. This process is repeated. The material enters the first, second, and third counterattack chamber from large to small, and is repeatedly crushed until the material is crushed to the required particle size and discharged from the discharge port.
Advantages of Impact Crusher
High efficiency and energy saving
Qualified particle shape
Optimized structure
High comprehensive benefit
Technical Parameter of Impact Crusher
| Model | Specificati on (mm) | FeedOpeni ng (mm) | Max. Feeding size(mm) | Capacity (t/h) | Model of motor | Power (kw) |
| PF-1010 | Φ1000X1050 | 400X1080 | 300 | 50-90 | Y315S-6 | 75 |
| PF-1210 | Φ1250X1050 | 400X1080 | 300 | 70-130 | Y315L1-6 | 110 |
| PF-1214 | Φ1250X1400 | 400X1430 | 300 | 90-180 | Y315L2-6 | 132 |
| PF-1315 | Φ1300X1500 | 680X1520 | 350 | 120-250 | Y2-355M2-6 | 200 |
| PF-1320 | Φ1300X2000 | 680X1570 | 500 | 160-350 | Y2-355M2-6 | 280 |
| PFV-1010 | Φ1000X1050 | 400X1030 | 200 | 35-60 | Y315S-6 | 75 |
| PFV-1210 | Φ1250X1050 | 570X1030 | 250 | 70-140 | Y315L1-6 | 110 |
| PFV-1214 | Φ1250X1400 | 570X1430 | 250 | 90-190 | Y315L2-6 | 160 |
| PFV-1315 | Φ1300X1500 | 625X1530 | 300 | 150-280 | Y2-355M2-6 | 200 |