Sand Washing Machine

Applied materials:silica sand, river sand, yellow sand, barite, marble, calcite, dolomite, etc.

Sand washing machine mainly cleans impurities and dust doped in sand and gravel and is an important sand washing equipment for the sand production line. The sand washer machine not only has high cleaning degree but also has high output. The output can reach 15-260 tons, which can meet the different needs of customers.

Applied materials:silica sand, river sand, yellow sand, barite, marble, calcite, dolomite, etc.

When the aritificial sand washer is operating, its power unit drives the impeller slowly after deceleration through the triangle belt and gear. The sandstone is entered into the washing tank by the feeding tank, rolled and ground by the impeller to remove impurities covered on the sandstone surface, as well as damage the water vapor layer of the coated sand grains.

At the same time adding water to form a strong water flow, removal of impurities and a small proportion of foreign objects in time, and these impurities will be discharged from the overflow outlet wash basin.

Working principle of wheel sand bucket washer

Working principle of spiral sand washer

Due to the different size of the solid grain, different proportion, screw sand washing machine’s speed in the liquid settlement is different, fine ore floating in the water overflow and outflow, coarse particles sink at the bottom of the tank.

The spiral sand washer is a grading device that filters the powder that is ground out of the mill and then uses a spiral spinner to spin the crude material into the grinder inlet, filtering out the fine material from the overflow pipe. The base of the machine is made of slotted steel, and the body is welded by steel plate. The inlet head of the spiral shaft, the shaft head, the pig iron sleeve, wear-resistant and durable.