Product principle：
1.Large quantity air inflow; low energy consumption.
2.Every chute is levelly installed and performs three functions: inhaling air, inhaling ore pulp and flotation separation without accessories.
3.Ore pulp circulate reasonably, which largely reduce the sediment of coarse sand.
4.Self-control device is set up to adjust the ore pulp surface.
5.The impeller is with backward inclined upper and lower blades. The upper blade produces ore pulp upper circulation while the lower blade produces ore pulp lower circulation.
2.Every chute is levelly installed and performs three functions: inhaling air, inhaling ore pulp and flotation separation without accessories.
3.Ore pulp circulate reasonably, which largely reduce the sediment of coarse sand.
4.Self-control device is set up to adjust the ore pulp surface.
5.The impeller is with backward inclined upper and lower blades. The upper blade produces ore pulp upper circulation while the lower blade produces ore pulp lower circulation.
Product Introduction:
Impeller diameter :300-650mm
Capacity :0.2-3.5t/h
Flotation machine can be used for separating copper, lead-zinc ore, molybdenum ore, graphite ore, fluorite ore, phosphate, selected gold, silver, iron, rare earth ore, talc and so on. It is widely used in the separation and recovery for fine minerals of ferrous metal, precious metal, nonferrous metal, non-metallic minerals, rare metal, non-metal, etc.
Flotation machine is the equipment to complete the flotation process, which is also called flotation cell. It is widely used for the rough, fine and reverse flotation operations of copper, lead, zinc, nickel, molybdenum and other non-ferrous metal, ferrous metal and nonmetal minerals. The types of flotation machine mainly include mechanical agitation flotation machine and froth agitation flotation machine.
Working principle:
When flotation machine is working, the pulp in the cell is breathed from the surrounding in the between of impellers. At the same time, the low pressure air blew by air blower enters in though air distributor too. Pulp and air mixture totally, and then enter into the cell from the impeller. When bubbles rises foam stability region, they are collected together and flow out into bubble cell. Some other pulp flows towards the bottom of impeller, and is mixed by impeller with air again to form mineral laden bubbles. The rest will flow towards next cell until leaving tailings.
Capacity :0.2-3.5t/h
Flotation machine can be used for separating copper, lead-zinc ore, molybdenum ore, graphite ore, fluorite ore, phosphate, selected gold, silver, iron, rare earth ore, talc and so on. It is widely used in the separation and recovery for fine minerals of ferrous metal, precious metal, nonferrous metal, non-metallic minerals, rare metal, non-metal, etc.
Flotation machine is the equipment to complete the flotation process, which is also called flotation cell. It is widely used for the rough, fine and reverse flotation operations of copper, lead, zinc, nickel, molybdenum and other non-ferrous metal, ferrous metal and nonmetal minerals. The types of flotation machine mainly include mechanical agitation flotation machine and froth agitation flotation machine.
Working principle:
When flotation machine is working, the pulp in the cell is breathed from the surrounding in the between of impellers. At the same time, the low pressure air blew by air blower enters in though air distributor too. Pulp and air mixture totally, and then enter into the cell from the impeller. When bubbles rises foam stability region, they are collected together and flow out into bubble cell. Some other pulp flows towards the bottom of impeller, and is mixed by impeller with air again to form mineral laden bubbles. The rest will flow towards next cell until leaving tailings.
Technical Parameters：
| Model | SF0.37 | SF0.7 | SF1.2 | SF2.8 | SF4 | ||
| Volume (m3) | 0.37 | 0.7 | 1.2 | 2.8 | 4 | ||
|
Impeller diameter (mm) |
300 | 350 | 450 | 550 | 650 | ||
| Capacity (t/h) | 0.2-0.4 | 0.3-0.9 | 0.6-1.2 | 1.5-3.5 | 0.5-4 | ||
| Impeller speed (r/min) | 352 | 400 | 312 | 268 | 238 | ||
| Motor | model | rotor | Y90L-4 | Y132S-6 | Y13M-6 | Y180L-8 | Y200L-8 |
| scraper | Y80L-4 | Y90L-6 | Y90L-6 | Y100L-6 | Y100L-6 | ||
| power(kw) | ①1.5 ②0.75 | ①3 ②1.1 | ①5.5 ②1.1 | ①11 ②1.5 | ①15 ②1.5 | ||
| Chute weight (kg/chute) | 445 | 600 | 1240 | 2242 | 2660 | ||
| Overall dimension (mm) | 700×700×750 | 900×1100×950 | 1100×1100×1100 | 1700×1600×1150 | 1700×1600×1150 | ||
Note: The above product configuration is not necessarily the factory standard configuration, please consult us when you purchase, we wholeheartedly for your service, for your custom ~.
Typical Case：
Related Products：
Submit demand feedback online
You can fill out the following form, your contact information and product requirements submitted to us, we will contact you as soon as possible to resolve, thank you! In order to be able to contact you in a timely manner, please be sure to fill out your contact information and demand information.
contact us
company adddress: NO.89, Jinsuo road, Hi-tech zone, zhengzhou city , henan province
Zip code:450000
Hotline：+8613526805404
Service Hotline：+8613526805404
Email：Yonghanmachinery@126.com
