+86 13526805404
HOME
Hot:+86 13526805404

COMPANY/INTRODUCTION

Striving for first-class brand achievements YONGHAN quality

Have sophisticated machining equipment and strong technical force. Finished products sold throughout the country, very popular with users【DETAILED】


    • Product principle：

     product performance:
     
    1, the company according to customer demand, for oily materials in the process of crushing the characteristics of easy out of oil, after years of research and development, repeated experiments, continuous improvement and upgrading, so as to develop the product.
     
    2, A153 sesame crusher using high speed steel blade in the form of high-speed cutting material, the contact surface is small and fast, so as to achieve the effect of oil.
     
    3, the machine is made of stainless steel, wear-resistant, durable, in line with the standards of food processing, motor adopts semi closed installation, dust-proof, anti hot, sanitary and beautiful, and the operation is simple, safe and reliable.
     
    4, this machine can increase or decrease the number of disc cutter to achieve particle size. Super multi disc cutter, the finer particles; cutter less, more coarse particles.
     

    Product Introduction:

    1、the company according to customer demand, for oily materials in the process of crushing the characteristics of easy out of oil, after years of research and development, repeated experiments, continuous improvement and upgrading, so as to develop the product.

    2、 A153 sesame crusher using high speed steel blade in the form of high-speed cutting material, the contact surface is small and fast, so as to achieve the effect of oil.

    3、the machine is made of stainless steel, wear-resistant, durable, in line with the standards of food processing, motor adopts semi closed installation, dust-proof, anti hot, sanitary and beautiful, and the operation is simple, safe and reliable.

    The note of fineness from 10 to 100 meshes, according to different materials, the oil content, sugar content, moisture content of each are not identical, able to crush the fineness is not the same, some materials can be crushed to a fine, only some into coarse granular. Containing particularly water / oil content is particularly high / especially high in sugar containing material, the machine cannot guarantee processing after water / no oil / not into a paste, please customers to buy the machine before the need for materials processing first conduct a scientific, objective and fair assessment of the, in order to avoid unnecessary misunderstanding. If not the quality of the machine, the company does not accept no reason to return.
     

    the scope of application:
     
    Condiment factory, food factory, processing shop, kitchen, restaurant, canteen, hotel etc..
     
    Machining range:
     
    1, melon seeds, sesame seeds, almonds, red dates, peanuts, walnuts, sugar, garlic, ginger, potatoes, peppers, onions, lotus root and so on.
     
    2, sesame, red dates can be crushed into a uniform powder. Sesame, in high temperature (more than 200 DEG C) a short time under the condition of stir for 3-5 minutes, the crushing effect is better.
     
    3, high oil content, high moisture content of the material, only puree, fritters or granular shape.
     
    4, dry materials, the requirements of the stir fry, stir fry, and then the machine, the effect is better, finely chopped, the yield is higher.




     instructions for use:
     
    1, according to the different materials, adjust the number of cutting knife;
     
    2, the installation of the blade when the blade edge and the motor to maintain consistency;
     
    3, if a small amount of production, fineness requirement is high, and screen processing, each equipped with four blade with a piece of screen, a total of 2 screen; can also contain only a piece of screen, do not even loading screen.
     
    4, large quantity and fineness requirements is not high without screen;
     
    5, in walnut processing, onion, garlic, ginger, the major diameter of heavy oil or feed material can adjust sword and knife spacing and reduce knife number.
     
    6, feeding size should be less than 15 mm, larger pieces of material, should be broken or chopped.
     
    7, after the demolition of the screen, the machine will speed up production. If the fineness is not enough, you can crush two times or even three times.
     
    Six, maintenance matters:
     
    1, the machine should be placed in the level of the ground or on the table;
     
    2, regularly check the machine's motor, circuit, belt, screw, such as the discovery of loose, wear and tear should be timely reinforcement or replacement;
     
    3, after the completion of each processing need cleaning machine, removable blade under water to wash or dry cloth wipe clean and dry after the installation, coated with edible oil protection.
     
    4, with a blunt blade can be used after the oilstone grinding.
     
    matters needing attention:
     
    1, the machine cutter has edged, very sharp, so in the installation use must pay attention to the safety blade in mounting and dismounting must wear gloves, to prevent cuts.
     
    2, before the boot check voltage, steering is consistent with the requirements of the machine.
     
    3, the machine in operation process, should at any time a caretaker, such as the discovery of machine machine, abnormal sound, should immediately shut down, disconnect the power, check the machine, troubleshooting and to ensure there is no problem, reboot.
     
    4, after the use of the machine, please be sure to cut off the power supply.
     
    5, the power is cut off, can disassemble and clean the machine, and attention to prevent sharp knives and other parts, cut.
     
    6, this machine is only suitable for cutting brittle materials, customers in the process of use, should ensure that the material should not contain metal, stones, such as the hardness of a large foreign body, or easy to damage the disc knife, until the damaged motor, etc..
     
    warranty:
     
    1, the machine warranty for one year;
     
    2, the disc knife for vulnerable parts, not within the scope of the warranty;
     
    3, due to the external power supply, improper voltage, improper operation, or foreign matter led to the disc knife and other mechanical parts damaged, not in the scope of the warranty.
     

    Technical Parameters：

    Technical parameters
     
    Machine model A153
     
    Working voltage 220V/380V
     
    Motor power 2.2KW
     
    Disc knife number: 14
     
    Motor speed 2800r/min
     
    The production yield of 30-80kg/h (no screen output can be greater)
     
    Processing fineness 10-100 mesh
     
    Machine size 720 x 300 x x height 760 (mm)
     
    Machine weight 50kg
    Note: The above product configuration is not necessarily the factory standard configuration, please consult us when you purchase, we wholeheartedly for your service, for your custom ~.

    Typical Case：

    Submit demand feedback online

    You can fill out the following form, your contact information and product requirements submitted to us, we will contact you as soon as possible to resolve, thank you! In order to be able to contact you in a timely manner, please be sure to fill out your contact information and demand information.

    contact us

    company adddress: NO.89, Jinsuo road, Hi-tech zone, zhengzhou city , henan province
    Zip code:450000
    Hotline：+8613526805404
    Service Hotline：+8613526805404
    Email：Yonghanmachinery@126.com

    Related news

    Henan YongHan Mechanical Equipment Co., Ltd.

    HOT PRODUCT

    Crusher

    Dryer

    Mill

    Beneficiation

    Grain

    SOLUTION

    Crusher

    Dryer

    Mill

    Beneficiation

    Grain

    ABOUT US

    ABOUTCULTUREPRODUCTSCONTACTCASES
    MORE>>