- Product Introduction
- Product principle
- Technical Parameters
- Typical Case
Overflow ball mill
Product principle:
1. Adopt large diameter double roller bearings. It is easy to maintain and has high efficiency.
2. Adopt cone structure around the discharging part, which makes ball mill stable. It can grind the materials more fine because the diameter of steel ball is very small.
3. Adopt the whole steel frame and the precision of installation is very high.
4. The equipment works stably, reduces downtime and maintenance, and improves the efficiency. The ball mill adopts drum feeder instead of joint feeder and does not have inertial impaction.
2. Adopt cone structure around the discharging part, which makes ball mill stable. It can grind the materials more fine because the diameter of steel ball is very small.
3. Adopt the whole steel frame and the precision of installation is very high.
4. The equipment works stably, reduces downtime and maintenance, and improves the efficiency. The ball mill adopts drum feeder instead of joint feeder and does not have inertial impaction.
Product Introduction:
Feeding size≤25mm
Capacity:0.65-90t/h
It is widely used in ore beneficiation plants, cement industry, refractory industry, chemical industry, etc.The overflow type ball mill is used to grinding materials in wet condition. Compared with dry process ball mill, the biggest difference is --- its end cover is cone shaped. On the end cover there is only one wave lining plate. The biggest advantage is that it can dress low grade magnetic iron ore with high-precision.
The main component of wet overflow ball mill is a cylinder with bigger diameter and smaller length which is revolved by transmitting machinery. Materials are put in cylinder through the feed opening and then thoroughly grinded. The falling course of iron balls and ores can produce huge falling impact and autogenous grinding. The continuous feeding of ores can create considerable pressure to make ores move from feed opening toward discharge opening. Finally, acceptable particles are discharged from the discharge opening. Hollow shaft with the anti-spiral blade returns the steel ball and the coarse ore block.
Capacity:0.65-90t/h
It is widely used in ore beneficiation plants, cement industry, refractory industry, chemical industry, etc.The overflow type ball mill is used to grinding materials in wet condition. Compared with dry process ball mill, the biggest difference is --- its end cover is cone shaped. On the end cover there is only one wave lining plate. The biggest advantage is that it can dress low grade magnetic iron ore with high-precision.
The main component of wet overflow ball mill is a cylinder with bigger diameter and smaller length which is revolved by transmitting machinery. Materials are put in cylinder through the feed opening and then thoroughly grinded. The falling course of iron balls and ores can produce huge falling impact and autogenous grinding. The continuous feeding of ores can create considerable pressure to make ores move from feed opening toward discharge opening. Finally, acceptable particles are discharged from the discharge opening. Hollow shaft with the anti-spiral blade returns the steel ball and the coarse ore block.
Technical Parameters:
Type |
Cylinder speed (r/min) |
Weight (t) |
Feeding size (mm) |
Particle size (mm) |
Capacity (t/h) |
Motor power
(kw) |
Weight (t) |
Ф900×1800 | 36~38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 4.6 |
Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 15.6 |
Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 24.7 |
Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 28 |
Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 32 |
Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 34 |
Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 36 |
Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 34 |
Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 42 |
Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 50 |
Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 48.5 |
Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 52.8 |
Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 54 |
Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 56 |
Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 54 |
Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 65 |
Ф2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 400 | 94 |
Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 430 | 102 |
Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 |
According to technological conditions |
800 | 137 |
Note: The above product configuration is not necessarily the factory standard configuration, please consult us when you purchase, we wholeheartedly for your service, for your custom ~.
Typical Case:
Related Products:
Submit demand feedback online
You can fill out the following form, your contact information and product requirements submitted to us, we will contact you as soon as possible to resolve, thank you! In order to be able to contact you in a timely manner, please be sure to fill out your contact information and demand information.
contact us
company adddress: NO.89, Jinsuo road, Hi-tech zone, zhengzhou city , henan province
Zip code:450000
Hotline:+8613526805404
Service Hotline:+8613526805404
Email:Yonghanmachinery@126.com