Product principle：
1.Sludge dryer adopts automatic control device, we only need controlling panel to adjust time and finish the whole process, which improves the drying efficiency.
2.The rotating barrel adopts stainless steel, and the barrel is beautiful and durable.
3.Adopt triangular belt, the dryer operates stably, has low noise and is very safe.
4.High-efficiency efficient air exit and inner-cage rotary movement makes sure can dry very fast and uniformly. It has big discharging port and is easy to discharge the material,
5.High quality heat exchangers can control negative and positive motion, and improve drying quality.
2.The rotating barrel adopts stainless steel, and the barrel is beautiful and durable.
3.Adopt triangular belt, the dryer operates stably, has low noise and is very safe.
4.High-efficiency efficient air exit and inner-cage rotary movement makes sure can dry very fast and uniformly. It has big discharging port and is easy to discharge the material,
5.High quality heat exchangers can control negative and positive motion, and improve drying quality.
Product Introduction:
Weight:9-135t
Production Capacity:1.9-76t/h
Sludge dryer produced by Yonghan Machinery is mainly used for dehydrating and drying sludge, thus reducing the water content and volume of sludge. It has many advantages such as strong adaptability, high heat utilization rate, uniform drying effect, fewer clean-up times, convenient maintenance, etc.
Sludge dryer is widely used in building material, metallurgy, chemical industry, cement industry, etc. It is used for drying sludge, sewage and slurry, including urban sludge, municipal sludge, sewage plant sludge, industrial sludge, metallurgy sludge, light industry sludge, coal sludge, mineral sludge, foundry sludge, textile sludge, electroplating sludge, activated sludge, sewage sludge, petrochemical sludge, paper-making sludge, printing and dyeing sludge, tanning sludge, slaughter sludge, pharmacy sludge, etc.
Sludge is fed into the dryer by a feeding device through an oblique chute; as the dryer rotates, the sludge is lifted up and scattered by lifting blades, and hot air preheats and drys the sludge to a certain extent; when the sludge falls down to the grate type blades, it is dried by the hot blades; at the same time, the hot air drys the sludge when it is lifted up and down by the blades; also, the cleaning-up device inside breaks up the lumps or pellets which are already formed in this process; finally, dried and loose sludge is discharged from the discharging end as final products;
Production Capacity:1.9-76t/h
Sludge dryer produced by Yonghan Machinery is mainly used for dehydrating and drying sludge, thus reducing the water content and volume of sludge. It has many advantages such as strong adaptability, high heat utilization rate, uniform drying effect, fewer clean-up times, convenient maintenance, etc.
Sludge dryer is widely used in building material, metallurgy, chemical industry, cement industry, etc. It is used for drying sludge, sewage and slurry, including urban sludge, municipal sludge, sewage plant sludge, industrial sludge, metallurgy sludge, light industry sludge, coal sludge, mineral sludge, foundry sludge, textile sludge, electroplating sludge, activated sludge, sewage sludge, petrochemical sludge, paper-making sludge, printing and dyeing sludge, tanning sludge, slaughter sludge, pharmacy sludge, etc.
Sludge is fed into the dryer by a feeding device through an oblique chute; as the dryer rotates, the sludge is lifted up and scattered by lifting blades, and hot air preheats and drys the sludge to a certain extent; when the sludge falls down to the grate type blades, it is dried by the hot blades; at the same time, the hot air drys the sludge when it is lifted up and down by the blades; also, the cleaning-up device inside breaks up the lumps or pellets which are already formed in this process; finally, dried and loose sludge is discharged from the discharging end as final products;
Technical Parameters：
|
Model(m)
(Shell diameter*shell length) |
Shell cubage
(m³) |
Capacity (t/h) |
Gradient
（°） |
Highest inlet air
temperature （℃） |
Main motor
power （kw) |
Weight
（t） |
|
Φ1.2×8.0
|
9.0
|
1.9～2.4
|
3～5
|
700～800
|
7.5
|
9
|
|
Φ1.2×10
|
11.3
|
2.4～3.0
|
3～5
|
700～800
|
7.5
|
11
|
|
Φ1.5×12
|
21.2
|
4.5～5.7
|
3～5
|
700～800
|
15
|
18.5
|
|
Φ1.5×14
|
24.7
|
5.3～6.6
|
3～5
|
700～800
|
15
|
19.7
|
|
Φ1.5×15
|
26.5
|
5.7～7.1
|
3～5
|
700～800
|
15
|
20.5
|
|
Φ1.8×12
|
30.5
|
6.5～8.1
|
3～5
|
700～800
|
18.5
|
21.5
|
|
Φ1.8×14
|
35.6
|
7.6～9.5
|
3～5
|
700～800
|
18.5
|
23
|
|
Φ2.2×12
|
45.6
|
9.7～12.2
|
3～5
|
700～800
|
22
|
33.5
|
|
Φ2.2×14
|
53.2
|
11.4～14.2
|
3～5
|
700～800
|
22
|
36
|
|
Φ2.2×16
|
60.8
|
13.0～16.2
|
3～5
|
700～800
|
22
|
38
|
|
Φ2.4×14
|
63.3
|
13.5～16.9
|
3～5
|
700～800
|
37
|
45
|
|
Φ2.4×18
|
81.4
|
17.4～21.7
|
3～5
|
700～800
|
37
|
49
|
|
Φ2.4×20
|
90.4
|
19.3～24.1
|
3～5
|
700～800
|
45
|
54
|
|
Φ2.4×22
|
99.5
|
21.2～26.5
|
3～5
|
700～800
|
45
|
58
|
|
Φ2.6×24
|
127.4
|
27.4～34.0
|
3～5
|
700～800
|
55
|
73
|
|
Φ3.0×20
|
141.3
|
30.1～37.7
|
3～5
|
700～800
|
75
|
85
|
|
Φ3.0×25
|
176.6
|
37.7～47.1
|
3～5
|
700～800
|
75
|
95
|
|
Φ3.2×25
|
201
|
42.9～53.6
|
3～5
|
700～800
|
90
|
110
|
|
Φ3.6×28
|
285
|
60.8～76.0
|
3～5
|
700～800
|
160
|
135
|
Note: The above product configuration is not necessarily the factory standard configuration, please consult us when you purchase, we wholeheartedly for your service, for your custom ~.
Typical Case：
Related Products：
Submit demand feedback online
You can fill out the following form, your contact information and product requirements submitted to us, we will contact you as soon as possible to resolve, thank you! In order to be able to contact you in a timely manner, please be sure to fill out your contact information and demand information.
contact us
company adddress: NO.89, Jinsuo road, Hi-tech zone, zhengzhou city , henan province
Zip code:450000
Hotline：+8613526805404
Service Hotline：+8613526805404
Email：Yonghanmachinery@126.com
